Step 3 – Test connectivity
At this step you will be able to connect from test wireless computer to the Internet through your Private Connection.
1. Make sure your test computer is not connected to the Internet.
2. Search for available wireless networks. You should see a network with SSID of 2HOTSPOT. If you can’t see it, validate Step 1.
3.
Connect to the 2HOTSPOT network and verify that you can access the Internet from
the test computer.
If you can not
access the Internet from the test computer, validate step 1 and that your main
PC can access the Internet.
Note: If you already installed the 2hotspot
controller before this stage and your test machine can not access the
Internet, it might be the 2hotspot controller that is blocking Internet
access. To make sure Internet connectivity is not blocked by 2hotspot
controller you can stop it. To stop the 2hotspot controller, from the
2hotspot controller system tray icon 
select Stop to stop the
2hotspot controller.
Continue to Step 4 – Install and configure the 2hotspot controller